Unicorn Spit is a non-toxic, water-based gel stain and glaze that can be used on raw, sanded, or sealed wood surfaces. It creates colorful swirls and designs with a unique, eco-friendly scent. Unicorn SPiT is water-based, making it safer and easier to clean up. However, it requires an oil base top coat.
To make your glaze, dilute Unicorn SPiT by up to 20 with water, adding 10 parts in a resealable container and gradually adding up to 2 parts water. You can also customize your stain by adding up to 70 parts water to customize your paint. To test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually add up to 3 parts water until the desired effect is achieved.
To dilute Unicorn SPiT with water, add 1 part UNiCORN SPiT to a resealable container and add 1 part diluting agent to the container. This method allows you to control the opaqueness of your paint. For best results, wash your fabric with dried Unicorn SPiT design in cold water/vinegar at a 1:1 ratio mix. Let it set in vinegar for 24 hours, then rinse with cold water and a very gentle detergent.
For best results, wash your fabric in cold water by hand with very little laundry detergent. Various methods to increase the color of your project can be used to achieve the desired effect.
UNIcorn SPiT is available in SA from Totalboat Upcycle and is a great way to add a splash of color to your projects.
📹 A few different ways to use Unicorn Spit
This water based, non-toxic, pleasant smelling Unicorn Spit is a great way to add a splash of color to your projects whether it be …
Do you have to sand before using unicorn SPiT?
Unicorn Spit is a water-based stain that can be used on various surfaces, including wood. It has a mild scent and can be removed by re-activating it with water. It can be applied before or after cutting on the laser. To use Unicorn Spit, lightly mist the surface of the material with water, squeeze out some Unicorn Spit, and brush it across the damp surface. It dries quickly, so it is recommended to lightly mist the surface with water. There are numerous videos on using Unicorn Spit, which can be used for paint pouring, detailed painting, and staining.
Most people use a Plastic Wrap Blending Technique, which is not shown in this post. Three videos can be found for more information about Unicorn Spit and alternate techniques. The technique is similar to the Plastic Wrap Blending Technique, which is not shown in this post.
How do you prepare for unicorn SPiT?
It is recommended that a cleaning agent be used to remove dirt, grease, grime, wax, and oils from surfaces. Subsequently, lightly buff the surface with fine-grit sandpaper to degloss it, then wipe it with derathane or 91 isopropyl alcohol to remove any residual dust.
How to seal unicorn SPiT?
The UniCORN SPiT BLOG offers a distinctive, three-dimensional effect with the application of multiple coats of gloss topcoat or a single coat of epoxy/resin-like FAMOWOOD GLAZE COAT. For optimal durability and moisture protection, a sealing agent is recommended.
How do I seal unicorn SPiT?
The UniCORN SPiT BLOG Seal can be applied with any non-water-based coating, thereby transforming the initial chalky finish into a multitude of vibrant colors and a satin or matte finish, which collectively create a two-dimensional effect.
How to layer unicorn SPiT?
To create a beautiful and luminous layer of Sparkling Unicorn SPiT, wait for the first blended layer to dry before adding the second layer. This prevents the risk of lifting the previous one and ensures that the colors appear dull when dry. Repeat until enough layers are built up, with a hint of the black background visible. The key to layering is transparency, and Sparkling Unicorn SPiT’s translucent nature makes it easy to use and perfect for layering. Focus on letting the underlying layers show through the subsequent ones, and the end result will be luminous and beautiful. Don’t overwork the blending and layering process, and enjoy the process.
Is unicorn SPiT oil or water based?
The author tried painting maple plywood earrings with alcohol ink, but decided to explore other options. They discovered a water-based stain called unicorn spit, which can be used on various surfaces and has a mild scent. The stain can be removed by re-activating it with water. It can be applied before or after cutting on a laser. To use the product, lightly mist the surface with water, squeeze out Unicorn Spit, and brush it across it. There are numerous videos on using it, and it can be used for paint pouring, detailed painting, and staining.
The author also mentions the Plastic Wrap Blending Technique, which is not shown in the post. Three videos are provided for more information and alternate techniques. The author recommends checking out these resources for more information and inspiration.
How do you get rid of unicorn SPiT?
Unicorn SPiT is a water-resistant and machine washable fabric treatment that retains much of its colour. To increase its colourfastness, various methods can be used, such as mixing a Fabric Medium with Unicorn SPiT, using Allure® Dimensional Design Adhesive Paint, applying a non-water-based fabric protectant, using a hair dryer, ironing with wax paper, using vinegar, or using a clothes dryer. ZiaTeal is not a colourfast color, so other colors may be used if the project will be exposed to moisture.
Custom colours can be created by mixing Unicorn SPiT colors together or mixing most water-based paints (chalk style or mineral-based) with Unicorn SPiT. The Sparkling colors and the Artistic Vivations range can also be mixed with the standard Unicorn SPiT, but the total amount of colors possible is limited by the user’s imagination.
For best results, wash the fabric in cold water by hand with very little laundry detergent and rinse with cold water. To increase the colourfastness of the Unicorn SPiT, mix a Fabric Medium with Unicorn SPiT, Allure® Dimensional Design Adhesive Paint, non-water-based fabric protectant, hair dryer, iron, vinegar, or clothes dryer. For a more washed-out look, let the fabric set for 24 hours before washing and machine wash in a gentle cycle with cold water and dry if desired.
What do you mix unicorn SPiT with?
This alcohol ink is a versatile medium used for various applications such as wood staining, painting, fabric dying, glass art, and refinishing furniture. It is formulated with aromatherapy-infused, ViBRANT, certified non-toxic colors and can be applied using various tools like brushes, foam pads, spray bottles, airbrushes, cloths, paper towels, or even hands. The product can be easily manipulated and adjusted using water to prevent drying on the surface. It is suitable for schools, professionals, artists, crafters, hobbyists, and woodworkers worldwide.
How do you dilute unicorn SPiT?
Unicorn SPiT can be customized by dilution by up to 70% with water. To do this, mix 10 parts Unicorn SPiT with 7 parts water in a resealable container. Perform a spot-test to ensure the desired result. Ensure the surface is clean and free of dust, dirt, grime, oil, sealer, stain, or paint. Apply the mixture directly to the surface and use a spray bottle of water to prevent it from drying out.
What is the best sealant for unicorn SPiT?
The Unicorn Spit is a water-based stain that can be used on various surfaces, including wood. It has a mild scent and can be removed by re-activating it with water. It can be applied before or after cutting on the laser. To use it, lightly mist the surface of the material with water, squeeze out some Unicorn Spit, and brush it across the damp surface. There are numerous videos on using it, and it can be used for paint pouring, detailed painting, and staining. Most people use a Plastic Wrap Blending Technique, which is not shown in this post. For more information on this product and alternate techniques, check out these videos:
- Unicorn Spit Techniques on Wood Plank Unicorn SPiT SPARKLiNG on Bare Wood Unicorn SPit Technique
- Oiling and Polyurathane – Recommended method for coating designs
- Rustoleum Clear Coat – Fastest method for coating designs
- Resin – Possible coating in resin.
In summary, Unicorn Spit is a versatile stain that can be used for various purposes, including paint pouring, detailed painting, and staining.
How long does it take for unicorn SPiT to dry?
The drying time for Unicorn SPiT is relatively rapid, with a timeframe of 30 to 60 minutes, contingent upon the specific material, humidity, and temperature conditions. To prevent the material from drying and to facilitate manipulation, a spray bottle of water should be used.
📹 Unicorn Spit Baby Wipe Application
A quick tutorial on how to use a baby wipe to apply unicorn spit to a laser cut ornament.
Just a note – despite the lovely photos of picnic tables, outdoor chairs, etc. this stuff is definitely NOT light fast. I used it on a barewood item last summer and coated with my go-to oil based varnish as directed. Within 2 months you couldn’t even tell what colour it was! Indoor projects only folks!
Hello, I love you ornaments!! I want to work on an outdoor (small) walking bridge. My plan is to use blue, green, teal and maybe another color. The wood is a pine and unfinished. After making sure it clean. Should I wet it down and then add the spit and then rub and blend. Or start with a dry wood? Then after dry seal with a polyurethane.