This blog post provides a step-by-step guide for building a greenhouse misting system. The process involves connecting the water source, using flexible plastic tubing for drip irrigation, and misting nozzles. The first step is to place a filter (ideally mesh) onto the tap, screwing the adapter onto the tap and pushing the “barbed” end into it. Misting systems are relatively easy to install and don’t require any special skills or tools. Most kits come with everything you need for installation, including detailed instructions.
Advantages of misting systems include their effectiveness and various applications across a wide range of greenhouses. To build a small greenhouse misting system, first place a filter (ideally mesh) onto the tap. Screw the adapter onto the tap and push the “barbed” end into it. When fitting the cover, ensure the frame is tightly pushed together and the door is unzipped before sliding over the frame.
The process begins with evaluating the greenhouse, planning the system, gathering materials, preparing the water source, and installing the misting system. At the end of the run, a plug must be installed by punching holes every 30 inches into the tubing. For optimal coverage, it is recommended to use a hole punch.
In summary, this DIY greenhouse misting system is a simple and cost-effective solution for keeping entertaining areas cool during the summer season.
📹 Timed Propagation Mist DIY and Save Money
I prefer to propagate plants from cuttings under timed mist (as compared to humidity domes or “tenting”) – the better air circulation …
📹 How to Set Up A Misting System with The Garden Gurus
Trevor from The Garden Gurus is back, and just in time for Summer! Keep entertaining areas cool this season with a Misting Kit.
Add comment