How To Secure The Frame Of A Pvc Greenhouse?

To build a greenhouse using PVC pipe and plastic sheeting, measure the length and width of the greenhouse, cut it to size, and apply duct tape around the perimeter. Secure the plastic to the ground with tie-down straps. For metal frames, use a pneumatic stapler or hammer and nails to attach the plastic to the frame. Two basic methods for anchoring greenhouse plastic are the STAPLES AND SCREWS Method and the LOCK CHANNEL AND WIGGLE WIRE Method.

To prevent a plastic greenhouse from blowing away in strong winds, use appropriate anchoring techniques such as ground anchors. Smooth the surface of the greenhouse by sanding rough spots down or using tape to cover abrasive spots. Ground anchors can be used to strap or bolt the plastic greenhouse down. Some viewers suggested using more extreme DIY solutions for securing the frame to the ground, such as drilling holes in the PVC and attaching them to the wrap with screws.

There are four primary ways to attach greenhouse plastic to metal framing: Single Poly Lock Channel and Spring Wire (link to hardware), Double Poly Lock Channel and Spring Wire, and butyl tape. A white tarp, UV coated, and slightly bigger than the roof is recommended for tying on over the greenhouse during stormy or winter weather. Premium garden clips with a unique curved body that fits 3/4-1 inch PVC pipe are designed for an ultra-secure grasp.

In summary, building a greenhouse using PVC pipe and PVC fittings requires careful planning, proper anchoring techniques, and careful use of tools like duct tape and tie-down straps.